 |
 |
 |
|
The Artist Elite AE3000 delivers supreme performance at extreme SPLs.
This high-SPL large diaphragm cardioid condenser instrument mic excels
in applications such as guitar cabinets, toms, snare, timpani, horns and
overheads. Its large-diaphragm capsule combines with the open
architecture of the headcase to provide an extremely accurate and open
sound. Its low-profile side-address design with tapered grille allows
for optimal positioning.
- Excels in high-SPL applications
- Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
- Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Robust design for enduring dependability on the road
- Integral 80 Hz HPF switch and 10 dB pad
| SPECIFICATIONS |
|---|
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
-43 dB (7.0 mV) re 1V at 1 Pa |
| IMPEDANCE |
100 ohms |
| MAXIMUM INPUT SOUND LEVEL |
148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal) |
| NOISE |
11 dB SPL |
| DYNAMIC RANGE (typical) |
137 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
83 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS |
11-52V DC, 3 mA typical |
| SWITCHES |
High-pass filter;
10 dB pad (nominal) |
| WEIGHT |
6.0 oz (170 g) |
| DIMENSIONS |
4.55" (115.5 mm) long,
1.89" (48.0 mm) maximum diameter |
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED |
AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE |
R6 |
 
|
|
|
 |
|
 |
|
|
|
