 |
 |
 |
|
Everything you need, nothing you don’t
The über-simple front panel controls of these amps give you all of your
sound’s vital signs at a glance. After flipping the MAIN switch, the
POWER LED will light when the amp is ready for action. Both channels
have independent gain dials as well as clip LEDs that indicate when the
signal is distorted and you need to reduce the gain. There are also
SIGNAL LEDs that light up when a signal is present at the input.
Panel discussion
A panel of switches found on
the back panel offers an array of cool options to apply to both
channels of the EP2000 and EP4000. The Clip Limiter lets you get even
more out of the amplifier without overdriving either it or your speaker
system. Built-in circuitry automatically senses when the EP2000 or
EP4000 is being overdriven into “clipping” and then momentarily reduces
the input level to avoid clipping distortion. This all happens in a few
thousandths of a second, so it’s an inaudible way of avoiding audible
clipping distortion. Of course, you can turn the Limiter off if you’re
feeling lucky.
Ultra-low frequency
sounds (infrasonics) are caused by rickety stage vibrations, mic thumps
and wind noise. While technically inaudible, they can cause a huge
drain on amp power, potential damage to your speakers and a sludgy
sound in the audible bass ranges. Both EP models feature a defeatable
Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz
(depending on your PA system’s capabilities).
The same panel
contains the switches that allow you to put these amps to work in
either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be
linked to additional power amps by switching into parallel mode.
These amps have guts
There’s plenty of awesome
features on the outside of the EP2000 and EP4000, but there’s also a
team of cool components on the inside helping it work its magic. They
come loaded with famously reliable Toshiba/Fairchild power transistors
as well as a high-current toroidal transformer for ultra-high transient
response and further reliability. Independent DC and thermal overload
protection on each channel automatically protects the amplifier and
speakers from any show-stopping meltdowns. There’s no need for fuses,
giving you one fewer potential mid-gig headache.
The EP2000 and EP4000
have both XLR and 1/4" TRS inputs. Even the outputs are totally
flexible, consisting of Speakon-compatible outputs and five-way binding
posts. Whether you’re dealing with bare wire or boutique audiophile
cabling, the EP2000 and EP4000 are right at home.
The exhaust fan,
visible on the back panel, is the final stage of an internal
front-to-back cooling system that keeps these amps working in the mild
temperatures they love, even through periods of extended use. Finally,
an impact-resistant, all-steel 2U rackmount chassis helps these
workhorses stand up to all the rigors of the road.
Accelerated Transient Response delivers the knock-out punch
It takes huge pulses of energy (current and voltage) to propel a woofer
cone out fast enough to match a bass beat. That’s called Transient
Response and it’s the holy grail of amp designers. By carefully
selecting transistors with extremely highslew rates and optimizing
other proprietary parts of our circuitry, our amps are able to react
instantly to even the most demanding electronic bass impulses. If the
woofers in your PA system can keep up, your audience will hear a
tighter, crisper, more natural sound.
The legend powers onIf you read the reviews of the EP2000 and
EP4000’s older brothers, the EP1500 and EP2500, and it’s clear that
those amps are renowned not only for their performance and durability,
but also their astoundingly low price tags. The EP2000 and EP4000
extend that legacy to the next level. Why shell out for a “Brand-X” amp
when you can get a BEHRINGER EUROPOWER amp and have money left over for
other gear?
Specifications:
- 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
- Precise Power, Signal and Clip LEDs to monitor performance
- XLR and 1/4" TRS input connectors for compatibility with any source
- Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
- Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
- Independent limiters per channel offer reliable protection against overload and distortion
- High-current toroidal transformer for ultra-high transient response and absolute reliability
- Ultra-reliable Toshiba/Fairchild power transistors
- Independent
DC and thermal overload protection on each channel automatically
protects amplifier and speakers without shutting down the show
- “Back-to-front” ventilation system including air filter for reliable operation
- “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
EP2000 Features
Stereo Mode
Parallel Mode
Bi-Amp Mode with Subwoofer
|
|
|
 |
|
 |
|
|
|
