The JBL JRX115 15" 2-Way Speaker Cabinet is ready for your live music
or PA needs. 2-way system with 15" woofer, 2" coil compression driver
with 1" exit, and a 90° x 50° horn. Trapezoid design.
Features
American-made JBL drivers, beefy JBL crossovers, MDF cabinets,
heavy-duty recessed handles, curved steel grilles, dual-socket
polemount system, and rugged carpet covering.
The JRX115 is
road-tough and has the renowned JBL sound. It also features Progressive
Transition Wave Guide horn design for enhanced high-end performance and
SoniGuard circuitry to protect driver voice coils from feedback and
clipping damage.
Features:
- JBL 15 in low frequency driver with a 64 mm (2.5 in)
diameter edgewound ribbon voice coil which provides
more cross-sectional wire area in the voice coil gap than
round wire designs, for greater efficiency and power handling.
|
-
# Ferro-fluid cooled compression driver with titanium
diaphragm improves high frequency performance as
well as system reliability.
|
-
The advanced network topology crossover design shapes
the frequency response to deliver coherent summation in
the crossover region.
|
-
High-voltage capacitors and inductors with massive cores
and heavy gauge wire enable the crossover network to
handle high power without saturating.
|
-
Progressive
Transition™ highfrequency waveguide provides superior coverage control,
reduced distortion, and smoother frequency response.
|
-
The
rugged, acoustically superior enclosure is constructed
from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced
adhesives and mechanical fastener technology for extreme durability and
improved low-frequency performance.
|
-
SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
|
-
Non-resonant, all-steel handles are used.
|
-
Attractive 18-gauge perforated, steel grille protects
components from damage.
|
-
Dual-angle pole-mount socket allows the speakers to tilt
10° for more uniform audience coverage.
Specifications:
| Power Rating
|
:
|
250 W / 1000W
|
|
|
Frequency Range
|
:
|
38 Hz - 16 kHz
(-10 dB)
|
|
Dimensions
(H x W x D)
|
:
|
699 mm x 460 mm x 432 mm
(27.5 in x 18.1 in x 17 in)
|
|
|
Frequency Response
|
:
|
50 Hz - 12.5 kHz
(±3 dB)
|
|
|
Sensitivity
|
:
|
98 dB SPL
(1w/1m)
|
|
|
Nominal Impedance
|
:
|
8 ohms
|
|
|
Recommended Amplifier Power
|
:
|
250 W to 500 W into 8 ohms
|
|
|
|
Nominal Dispersion
|
:
|
90º x 50º
|
|
|
Crossover Frequency
|
:
|
1.6 kHz
|
|
|
|
High Frequency Driver
|
:
|
JBL 2412 1 in exit compression driver mounted on Progressive Transition™ Waveguide
|
|
|
Low Frequency Driver
|
:
|
JBL M115-8A
|
|
|
Input Connectors
|
:
|
Neutrik® Speakon® NL-4 (x1); .25in TS phone jack (x1); parallel | |
|
