 |
 |
 |
|
X2™ XDR955 wireless microphone gives vocalists what they've always
wanted: unmatched dependability, total simplicity, and superior sound.
Its innovative digital technology solves problems that commonly cripple
traditional analog microphone systems.
DEPENDABILITY
XDR955 works overtime to ensure unmatched dependability.
• A secure audio transmission refuses interference caused by cell
phones, wireless networks and other sources of RF energy. You're
performance will be free of hiss, static and dropouts.
• Q-Diversity Plus, which is the combination of eight antennas
and receivers, ensures a rock-solid signal with double the stability of
other wireless systems.
SIMPLICITY
Just turn it on and start singing.
• Get up and running within seconds. Don't bother scanning for open frequencies, all 5 channels will work all the time.
• XDR955 wireless microphone works flawlessly on every stage in every region of North America.
SUPERIOR SOUND
No knobs to turn, no adjustments to make, just inspiring 24-bit sound.
• XDR955 is the only wireless microphone with VWT™ (Virtual
Wire Transmission). This enables it to deliver full-range frequency
response (10Hz-20kHz), wide dynamic range (>115dB), and excellent
transient response.
• The sonic characteristics of XDR955 are impeccable. With
blindfold-test accuracy, XDR955 sounds just like the industry-standard
wired microphone that is found on countless stages worldwide.
A complete package, X2 XDR955 digital wireless system
includes X2 XDH4 handheld transmitter microphone and the arena-ready X2
XDR4 digital receiver with rackmount kit and all applicable antennas
and batteries. Free of complicated setup, just fire it up and go. Specifications: | Transmission Format: |
 |
Line 6 proprietary digital audio transmission |
| A/D-D/A Conversion: |
|
24-bit delta sigma, 128 times oversampling |
| Frequency Response: |
|
10 Hz - 20 kHz |
| Audio Dynamic Range: |
|
> 115 dB |
| Distortion: |
|
0.03% THD |
| RF Carrier Frequency: |
|
902 MHz to 928 MHz, FSK, dual frequency transmission |
| Selectable Frequencies: |
|
Five |
| RF Output Power: |
|
15mw |
| Audio Output Level: |
|
Unity gain with transmitter input |
| Polarity: |
|
Positive voltage at input yeilds positive voltage at output |
| Transmission Range: |
|
~300 feet line-of-sight (may vary due to local conditions) |
| FCC Approval: |
|
Part 15 approved, no user-license required |
| Operating Temp. Range: |
|
–18° to +57° C (0° to +135° F) |
X2 XDR4 Receiver Specifications
|
| Output: |
|
2.12V RMS (Unbalanced: 1.8K Ohm) |
| Connectors: |
|
1/4-inch
unbalanced TRS output 1.8K-ohm impedance (tip= instrument voicing,
ring= full bandwidth, sleeve= ground) XLR Balanced 600 ohm |
| LED Display: |
|
Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter |
| Controls: |
|
Power On/Off, Channel Up and Down |
| Dimensions (WxHxD): |
|
1 3/4 inches W x 16 2/10 inches D x 7 1/2 inches H |
| Power Requirements: |
|
Includes AC/DC adapter (9V DC 500mA) |
| Weight: |
|
2.5 lbs (with rack hardware and antennas installed) |
| Housing: |
|
Polycarbonate, impact tested to 300 lbs. |
X2 XDH4 Transmitter Microphone Specifications |
| Controls: |
|
Power, Select |
| LCD Readout: |
|
Backlit, custom function |
| Dimensions |
|
6 1/4 inches x 1 1/2 inches (15.875 x 3.81 cm) without capsule |
| Battery Life: |
|
Switching power supply, ~8 hours (2x AA alkaline) |
| Weight: |
|
12 1/2 oz. (with 2x AA batteries installed) |
| Housing: |
|
Polycarbonate, impact-tested to 300 lbs. |
| Microphone Type: |
|
Premium moving-coil dynamic |
| Pattern: |
|
Cardioid |
| Frequency Response: |
|
50 Hz – 18 kHz |
| Sensitivity: |
|
2.5 mV/PA |
| Maximum SPL: |
|
144 dB |
|
|
|
 |
|
 |
|
|
|
