Instrument preamp with parametric EQ.
The SansAmp RPM is a versatile instrument preamp
with parametric equalization and SansAmp technology. This single space
rackmount model was adapted from the SansAmp Acoustic DI pedal, with
the addition of a Drive control, and redesigned as an expanded
multi-instrument tool. With a sweepable, semi-parametric EQ and
variable gain, the SansAmp RPM is a supercharged tone shaper for any
signal source. Partner it with a SansAmp RBI for the ultimate bass
pre-amp system, or with a SansAmp PSA for total domination.
Drive
adjusts the overall amount of gain and overdrive. Active Bass and
Treble controls cut or boost ±12dB Mid Shift is a parametric EQ control
that allows you to select the center frequency of the Mid control. Its
sweep ranges from 170 Hz to 3.0 kHz. This, then, enables you to notch
out any specific frequencies that may be causing your instrument to
feed back. Mid is also an active tone control, cut or boost ±12dB.
Blend allows you to mix the direct instrument signal with SansAmp Tube
Amplifier Emulation circuitry. Individual Level control for the XLR out
to optimize your amp's output relative to the P.A. system. Effects Loop
with Mix 50/50 switch to configure in series or parallel. 1/4" rear
input and XLR output with selectable levels. Buffered uneffected XLR
output to run a dry signal to a separate channel. Footswitch input to
engage unit. Footswitch output to chain and toggle between another
SansAmp RPM or SansAmp RBI.
A supercharged tone shaper for any signal source! Call or click today to order.
